HFC3 Funiculur Polygon And Forces Apparatus Didactic Equipment Vocational Education Equipment Mechanical Training Equipment
Description
A sturdy base board, supports a circular table above the bench top. The table supports a large protractor and central pin. Around the edge of the table can be secured movable pulleys. These pulleys can be secured at varying angles. Cords run over the pulleys and secure to a central ring, and Load hanger. The central ring sits over the central pin when the loads are being applied to the hangers. When the central ring is removed from the central pin, the system rests in its equilibrium position, and the lines of action of the forces are recorded by drawing along the weighted cords onto a piece of paper attached to the pulley table. The loads are applied using the hangers and cords provided, with the cords easily connecting to the shapes by the use of the small hooks provided. Two additional shapes are provided to expand the student learning into link polygons for three or more non-concurrent coplanar forces.
Features
Compact, visual bench top unit
Elegant demonstration of the conditions of equilibrium
Co-planar, concurrent and non-concurrent forces
Five loads can be applied
Large protractor for angular adjustment
Reaction disc and strip supplied
Full set of weights and hangers supplied Technical Specification
Base Board: 350(L) x 350(W) mm
Raised Table: 300mm above base board, Ø460mm
Protractor: 0…360°, 1° resolution
5 x pulley bracket
5 x Load hanger
Weights set
Reaction Disc: Ø160mm; 12 equi-spaced holes on Ø150mm PCD
Reaction Strip: 223(L) x 13(W) mm; 15 holes at 15mm pitch
Weights & Dimensions
Weight: 12 kg
Length: 350mm
Width: 350mm
Height: 350mm
Login 
Inquiry List
